The Sensor used for the channel.
Unique name for the Sensor.
|
Type: |
Alphanumeric |
|
Max Length: |
32 Characters |
|
Excluded: |
Unassigned |
|
Note: |
This name can be any alphanumeric that you choose, i.e., Remote Humidity, Immersion Probe, Platinum RTD, etc. However, whatever system is used, each one must be unique. |
The Type of the sensor.
|
Type: |
Alphanumeric |
|
Max Length: |
32 Characters |
|
Note: |
This name can be any alphanumeric that you choose, i.e., Temperature, Humidity, CO2, etc. |
The Low value of the sensor's range.
|
Type: |
Numeric |
|
Range: |
-1000 to 1000 |
|
Format: |
#### |
The High value of the sensor's range.
|
Type: |
Numeric |
|
Range: |
-1000 to 1000 |
|
Format: |
#### |
The Model Number of the sensor.
|
Type: |
Alphanumeric |
|
Max Length: |
32 Characters |
The Default Zero value of the sensor. Used for calibrating the sensor.
|
Type: |
Numeric |
|
Range: |
-1000 to 1000 |
|
Format: |
#### |
The Default Scale value of the sensor. Used for calibrating the sensor.
|
Type: |
Numeric |
|
Range: |
-1000 to 1000 |
|
Format: |
#### |
The Default Offset value of the sensor. Used for calibrating the sensor.
|
Type: |
Numeric |
|
Range: |
-1000 to 1000 |
|
Format: |
#### |
|
Edit |
Places the form into Update mode for Updating the Sensor |
|
New |
Places the form into Insert mode for Adding a new Sensor |
|
Insert |
Insert Mode - Validates the page and Adds the Sensor if there are no errors |
|
Update |
Update Mode - Validates the page and Updates the Sensor if there are no errors |
|
Cancel |
Update / Insert Mode - Cancels the Update or Insert and places the page in View mode |