The settings for each Message Center.
Unique name for the Message Center.
|
Type: |
Alphanumeric |
|
Max Length: |
32 Characters |
|
Excluded: |
Unassigned |
|
Note: |
This name can be any alphanumeric that you choose, i.e., 1, MessCtr2, Mike's MC, etc. However, whatever system is used, each one must be unique. |
Type of Message Center.
|
Options: |
TCP/IP (Networked Remote) RS232 (Local Hardwired) |
Active checkbox used to enable or disable this message center.
|
Checked: |
Message Center Enabled |
|
Cleared: |
Message Center Disabled |
Hardware Address of this message center.
|
Range: |
0 to 99 |
|
Format: |
## |
IP Address of this message center. Used by TCP/IP type.
|
Format: |
###.###.###.### |
|
Note: |
Can be left blank if the Message Center Type is RS232 |
Serial Communications Port of this message center. Used by RS232 type.
|
Options: |
Com 1 Com 2 Com 3 Com 4 |
|
Note: |
Not used if the Message Center Type is TCP/IP |
|
Edit |
Places the form into Update mode for Updating the Message Center |
|
New |
Places the form into Insert mode for Adding a new Message Center |
|
Verify |
Sends a Verification Message to the Message Center |
|
Insert |
Insert Mode - Validates the page and Adds the Message Center if there are no errors |
|
Update |
Update Mode - Validates the page and Updates the Message Center if there are no errors |
|
Cancel |
Update / Insert Mode - Cancels the Update or Insert and places the page in View mode |